Products
The PS•4000 Flat Wall Form sets a new standard for speed, versatility, and quality construction. Available in 24” and 12” heights, complete with 90° and 45° corners.
Ease of Use – The improved tongue-and-groove design simplifies installation on the job and minimizes the problems associated with concrete spillage at the top of the wall. The forms are reversible and the markings on each side of the recessed attachment studs provide an easy guide for proper alignment. The 1-1/2” width of each stud provides a strong, secure, and generous surface area for mechanically securing any type of interior or exterior finish.
The Strength of Steel – All commercial concrete form systems use steel ties because of steel’s inherent strength and durability. The patented (pending) PolySteel tie in the PS•4000 is made of galvanized steel wire welded in at least 40 locations. This unique design provides the strength, fire resistance, and dimensional stability that is the hallmark of the PolySteel name.
Versatility- The PS•4000 is also offered in a half-size form (12” high) to minimize cutting in the field and maximize design flexibility.
Faster Installation -Each form creates eight (8) square feet of wall area – 50% more than standard ICFs. Four courses of PS•4000 forms will stack an 8-foot wall, compared to six 16” forms or eight 12” forms.
And, to speed your installation further, we offer 45° and 90° corner forms in both full size (24”) and half-size (12”) forms.
Our PS•4000 Flat Wall Series meets the demanding performance criteria of industry leadership and is backed by the unparalleled service and support of our professional network of PolySteel distributors. We also offer you innovative solutions that complement every project like Dietrich TradeReady® Steel Floor Joists, Lite-Deck, an excellent floor and roofing system and Perform Guard the only termite resistant technology in the ICF industry.
————————————————-
The PS•3000 Waffle Grid Form represents the most cost-effective engineered insulated concrete wall system on the market. With a 4-hour fire rating, Perform Guard® EPS termite protection, and a performance record of 27 years, this proven – and improved – technology will meet the needs of almost any project. Available in 6”, 8”, and 10” sizes with 45° and 90° corners.
Superior Performance - The strength of concrete posts, connected with 2-1/2″ solid concrete webs on the 6″ and 8″ forms and 3-1/2″ solid concrete webs on the 10″ forms, provides extraordinary structural performance with minimal material. With the same 4-hour fire rating as all other PolySteel forms, the PS•3000 can be used in any commercial or residential application – all while using 25% less concrete than a comparable flat wall form.
Ease of Use – The new PS•3000 series tongue-and-groove design makes this form reversible and easy to install on the job site. The markings on each side of the recessed attachment studs provide an easy guide for proper alignment of both the studs and the concrete cores. The 1-1/2” width of each stud provides a generous surface area for mechanically securing any type of wall covering desired. The recessed attachment stud also allows for easy application of synthetic stuccos without any additional preparation work.
The Strength of Steel – The patented PolySteel tie provides the strength, fire resistance, and dimensional stability that is the hallmark of the PolySteel name.
Seismic Advantages – With the recent reclassification of, and heightened concerns over, the nation’s seismic zones, the reduced mass of a wall constructed with the PS•3000 offers a distinct advantage over traditional flat wall designs. With 25% less concrete than a standard concrete wall, this engineered concrete design can provide all of the structural performance your project needs with higher efficiency, and greater safety.
PS•3000, like all PolySteel forms, is simple to use. We also offer you innovative solutions that complement every project like Dietrich TradeReady® Steel Floor Joists, Lite-Deck, an excellent floor and roofing system and Perform Guard the only termite resistant technology in the ICF industry.
———————————————–
The NEW PolyPro Knock-Down (KD) Flat Wall Form is the next generation of PolySteel versatility and innovation. Now create wall widths from 4” to 24” and beyond with this lightweight composite tied form.
Ease of Use
Knock-Down design provides easy transportation to and from the job, safer storage, and efficient on-site installation.
Strength
Composite ties every 6″ combined with reinforced concrete and the industry’s largest attachment stud creates a superior total wall solution for any residential or commercial project.
Flexibility
From 4″ to 24″ and beyond, you can create any size wall in 2″ increments with the unique PolyPro extender. Multiple Rebar Cradles provide easy installation in the field and a full-spectrum of design options.
Faster Installation
2′x4′ panels install 50%-100% faster than most other ICFs. Panels are easy to cut and assemble on the jobsite.
Efficient
Form ties 6″ on center reduces jobsite waste and creates a stronger form during concrete placement.
Cost Effective
Lower pricing combined with reduced freight costs, and a labor-saving design, makes you more competitive on every job.
We also offer you innovative solutions that complement every project like Dietrich TradeReady® Steel Floor Joists, Lite-Deck, an excellent floor and roofing system and Perform Guard the only termite resistant technology in the ICF industry.
